Upgrading Firmware for the BDP-103EU/D, BDP-105EU/D

Firmware upgrade instructions:

WARNING: Although firmware upgrade is an easy and usually trouble-free process, it is important to ensure that the power supply to the player is stable and the upgrade process is not interrupted. A failed firmware upgrade can render the player unusable.

 

WARNING:  Please do not attempt to load the U.S (American) version firmware on to your EU model player. Your player will detect the firmware file as incorrect or corrupt.

 

There are three ways to upgrade the firmware: If your player has an Internet connection the easiest way to upgrade the firmware is the "Via Network" method. If you have a USB thumb drive, you may choose the "Via USB" method which is also the most reliable method. You can also use the "Via Disc" method by preparing a firmware upgrade CD yourself or requesting a firmware CD from OPPO customer service. Please follow one of the three procedures below based on the upgrade method chosen.

 

Firmware Upgrade via the Internet

  1. Turn on your TV display and the OPPO player. Eject the disc tray from the OPPO player and remove any disc. Make sure that the player is connected to the internet and the player is not playing any content.
  2. Press the SETUP button on the remote control to enter the setup menu. Select Device Setup, Firmware Upgrade, and then Via Network. 
  3. The player will start searching for the new firmware from an OPPO firmware server. Please follow the on-screen instructions to complete the firmware upgrade process. Use the remote control to respond to on-screen prompts. Do not use the front panel buttons because the front panel buttons will stop working during the upgrade process.
  4. DO NOT ATTEMPT TO TURN OFF THE PLAYER, UNPLUG THE POWER, OR PRESS ANY BUTTONS OTHER THAN NECESSARY TO RESPOND TO THE ON-SCREEN PROMPT DURING THE REMAINING UPGRADE PROCESS.
  5. In order to complete the firmware upgrade process, the player will turn off automatically.
  6. Turn on the player again, a new on-screen prompt of "Reset Factory Defaults" will show. It is optional but strongly recommended to reset the player settings by selecting "Reset Factory Defaults".
  7. Repeat from Step 2 above until the player reports that it already has the latest version. This will ensure that the player downloads and installs all parts of the firmware update.
  8. Check the new firmware version by going to the setup menu, and then selecting Device Setup - Firmware Information.
  9. Enter your customised settings as necessary.
  10. 10. Congratulations! You have just completed the firmware upgrade.

 

Firmware Upgrade via a USB Thumb Drive

  1. Insert a USB thumb drive to the computer that stores the downloaded BDP10XEU.bin file. (The USB drive must be in FAT or FAT32 format, not NTFS. If you are not sure, just use a new USB drive that is 2GB or smaller since small drives are usually factory-formatted in FAT/FAT32.) Verify that the BIN file is in the root/main directory of the USB drive, not contained within any other folder.
  2. Remove the USB drive from the computer.
  3. Turn on your TV display and the OPPO player. Eject the disc tray from the OPPO player and remove any disc. Make sure that there is no other USB drive connected to the player.
  4. Insert the USB drive containing the firmware file to a USB port on the player's front or back panel.
  5. The player usually can recognise the firmware file and prompt you for firmware upgrade. In case the player does not prompt you, press the SETUP button on the remote control to enter the setup menu. Select Device Setup, Firmware Upgrade, and then Via USB.
  6. Please follow the on-screen instructions to complete the firmware upgrade process. Use the remote control to respond to on-screen prompts. Do not use the front panel buttons because the front panel buttons will stop working during the upgrade process.
  7. DO NOT ATTEMPT TO TURN OFF THE PLAYER, UNPLUG THE POWER, OR PRESS ANY BUTTONS OTHER THAN NECESSARY TO RESPOND TO THE ON-SCREEN PROMPT DURING THE REMAINING UPGRADE PROCESS.
  8. In order to complete the firmware upgrade process, the player will turn off automatically. Unplug the USB drive after the player turns itself off.
  9. Turn on the player again, a new on-screen prompt of "Reset Factory Defaults" will show. It is optional but strongly recommended to reset the player settings by selecting "Reset Factory Defaults".
  10. Check the new firmware version by going to the setup menu, and then selecting Device Setup - Firmware Information. If you notice that the firmware versions displayed do not match the versions listed in this release note, please contact us to obtain the firmware files that are missing from a previous update.
  11. Enter your customised settings as necessary.
  12. Congratulations! You have just completed the firmware upgrade. Erase or discard the firmware file so you do not accidentally install the firmware again.

 

Firmware Upgrade via CD

  1. 1. If you requested a firmware CD from OPPO customer service, jump to step 5 of this procedure. You may also follow steps 2 - 4 to burn a firmware CD.
  2.  Click HERE to download the CD ISO image.
  3. Use your favourite CD/DVD burning software to burn a firmware disc from the downloaded CD image file (See the bottom of this page for help with burning ISO image files). While doing this, make sure you are not creating a new data disc, but burning from the already-created ISO CD image. Please consult your CD burning software's help/instruction manual for more information on how to do this.
  4. After the disc is burned, verify on the computer that the disc now contains a BDP10XEU.bin file. Ensure the file name and size are the same as shown below. This is your firmware disc.
  5. Turn on your TV display and the OPPO player. Make sure that the player is not playing any content.
  6. Eject the disc tray, put in the firmware disc, and then close the tray. The player usually can recognize the firmware disc and prompt you for firmware upgrade. In case the player does not prompt you, press the SETUP button on the remote control to enter the setup menu. Select Device Setup, Firmware Upgrade, and then Via Disc.
  7. Please follow the on-screen instructions to complete the firmware upgrade process. Use the remote control to respond to on-screen prompts. Do not use the front panel buttons because the front panel buttons will stop working during the upgrade process.
  8. DO NOT ATTEMPT TO OPEN THE DISC TRAY, TURN OFF THE PLAYER, UNPLUG THE POWER, OR PRESS ANY BUTTONS OTHER THAN NECESSARY TO RESPOND TO THE ON-SCREEN PROMPT DURING THE REMAINING UPGRADE PROCESS.
  9. Remove the disc from the tray when the tray ejects out. In order to complete the firmware upgrade process, the player will turn off automatically. In case the player retracts the tray and turns off before you remove the firmware disc, press the OPEN/CLOSE button on the front panel. The player will turn on and the tray will eject. Remove the disc at this time.
  10. Turn on the player again, a new on-screen prompt of "Reset Factory Defaults" will show. It is optional but strongly recommended to reset the player settings by selecting "Reset Factory Defaults".
  11. Check the new firmware version by going to the setup menu, and then selecting Device Setup - Firmware Information. If you notice that the firmware versions displayed do not match the versions listed in this release note, please contact us to obtain the firmware files that are missing from a previous update.
  12. Enter your customised settings as necessary.
  13. Congratulations! You have just completed the firmware upgrade. Erase or discard the firmware disc so you do not accidentally install the firmware again.

Working with ISO image files

 

Note: These are general instructions on how to burn the firmware CD with common CD burning software. Please consult your CD burning software's help/instruction manual for more detail.

Note: Avoid burning a data CD that has the ISO image on it, the player cannot update from the ISO. An ISO is the files required for update along with the instructions to your burning software on how to make the upgrade disc.

  1. In Windows 7, Right click the ISO file you downloaded, then select “Burn disc image” .
  2. In Nero Burning Rom version 6 or above , go to the 'Recorder > Burn Image…' menu and select the ISO image you downloaded.
  3. In Nero Burning ROM version 5 or earlier, just go to Nero Burning ROMs 'File > Burn Image' option and select the ISO image you downloaded.
  4. In Nero Express select the option for 'Disc Image or Saved Project' to select the ISO image file you downloaded and burn to CD.
  5. In Easy CD Creator , go to 'File > Record CD from CD Image' and select the ISO image you downloaded.
  6. In Power2Go , go to 'Burning > Burn Disc Image' and select the ISO image you downloaded.
  7. In ImgBurn, go to 'Write image file to disc' and select the ISO image you downloaded.
  8. In burnatonce, go to 'File > Load New Image...' and select the ISO image you downloaded. Click the "Write" button to burn the CD.

 

Contact Options

Please use the appropriate form above to send us a message or call us…

Monday - Friday: 9.30 - 17.30 (CET)
+49 341 4783 9885

News and events| Contact us| Where to buy|

Customer Service Hours : Mon- Fri. 9:30 AM- 5:30 PM (CET)       +49 341 4783 9885

© OPPO 2018 All rights reserved